Reference: 75032
Brand: Enphase
Solar kit 405W self-consumption microinverter IQ8+ ENPHASE
€399.00 TTC
Advantage of microinverters: Each panel is independent, so if one panel is in the shade, the others continue to produce.
No minimum purchase
Up to 4 times free of charge
7 days a week 9am-10pm
The IQ8M Enphase® Micro-Inverter represents a major advance in solar energy, offering a complete, reliable and high-performance solution for modern photovoltaic installations. The IQ8 series of Microinverters fromEnphase maximise energy production thanks to an advanced Maximum Power Point Tracking (MPPT) algorithm. Each Microinverter is individually connected to a photovoltaic (PV) module, allowing each module to operate optimally, independently of the others, even in the event of shading, soiling, different orientation or specific PV module problems.
211 Wp/m² | 1762 x 1134 x 30 mm | 21.0% efficiency | 144 cells | MC4-Evo 2
Article number 180342
The Trina TSM-420DE09R.08 from the Vertex S series is a robust module offering 420 Wp (211 Wp/m²) at 21% efficiency. It has 144 monofacial cells for a total module size of 1762 x 1134 x 30 mm, 3.2 mm glass (front side) and weighs 21.8 kg. It is covered by a robust 15-year product warranty and a 25-year extended performance warranty. Bulk orders for the Trina Vertex S 420 Wp are available in lots of 36 units per pallet or 936 pieces per container.
The IQ Cable Q-25-10-240 is a lightweight distributed generation cable with pre-installed connectors for IQ microinverters, enabling faster, simpler and more reliable installations. It is designed for portrait-facing photovoltaic modules and has a 1.3-metre spacing between connectors.
HISBOX Single-phase 32A residential AC enclosure
Single-phase AC enclosures are designed to suit inverters with a rated power of up to 6.4kVA. They comprise an earth leakage circuit breaker (ELCB) and a circuit breaker (CB) to protect the mains, as well as a Citel AC surge arrester and a CB to protect the AC part of the installation
Advantages of the earthing cable: - UV-resistant - Flexible tinned conductor - Halogen-free - CE marked For earthing PV systems.
This cable is intended for use in photovoltaic installations, e.g. in accordance with IEC 60364-7-712, and is suitable for application in/on equipment with protective insulation (protection class II). Our double-insulated solar cable HIKRA® SOL 1500V is intended for permanent use outdoors and indoors, for mobile, suspended or fixed installation. The robust materials withstand the long-term influences of nature and offer maximum quality and safety. When used correctly, this product is expected to last at least 25 years. Thanks to its good resistance to atmospheric conditions, the cable is particularly water-repellent and can be laid underground. Hikra Sol cables have the highest possible fire protection class for solar cables on the market. Please refer to our installation instructions.
The ClickFit EVO grey universal module clamp is made from high-quality steel with a special "Magnelis" coating for optimum corrosion resistance. The module clamp is supplied assembled as standard and is suitable for all framed solar panels between 30 and 50 mm thick. Thanks to its clever design, it can be used as an intermediate clamp and, in combination with the end cap, as an end clamp. The design also makes it possible to equalise the potential between solar panels. The universal module clamp penetrates the anodised layer of the solar panel and interconnects the solar panels when the system needs to be earthed. The clamps are fitted with anti-theft screws as standard and are available in black and grey.
The ClickFit EVO universal roof hook is made from high-quality steel with a special "Magnelis" coating for optimum corrosion resistance.
The universal roof hook is infinitely adjustable in height and width, so it can be used with any combination of tiles and battens. The strength of the roof hook, combined with the sophisticated point load distribution, minimises the risk of tile breakage and leakage. If you wish, the roof hook can be screwed to the roof. The self-aligning click system makes installation much easier. Thanks to the integrated cable management system, cables and sockets can always be connected neatly and securely.
The universal ClickFit EVO roof hook is suitable for all old and new generation roof tiles.
The ClickFit EVO mounting rail end cap is made from high-quality composite plastic and is therefore resistant to long-term exposure to sunlight and other weather influences. The end cap provides an attractive finished look and a windtight seal to the mounting rail. The end cap, in combination with the universal module clamp, forms the end clamp. The end cap slides under the solar panel, blocking the view of the mounting rail from the ground. When installing black solar panels, the use of black mounting rails is no longer necessary. The ClickFit EVO mounting rail end cap is available in black and grey.
The ClickFit EVO mounting rail is made from high-quality aluminium. Thanks to the aluminium and the hollow chamber technology used, the mounting rail is very light and extremely strong. This means that larger spans can be achieved, and the mounting rail is easy to handle on the roof. The ClickFit EVO mounting rail is available in several standard lengths.
The ClickFit EVO mounting rail is made from high-quality aluminium. Thanks to the aluminium and the hollow chamber technology applied, the mounting rail is very light and extremely strong. This means that larger spans can be achieved, and the mounting rail is easy to handle on the roof. The ClickFit EVO mounting rail is available in several standard lengths.
The ClickFit EVO installation aid is made of high-quality UV-stabilised composite plastic and is resistant to prolonged exposure to sunlight and other weather influences. When using the installation aid, the solar panel can be hooked onto the ClickFit mounting rail. When transferring the solar panels, the solar panel cables can be snapped into the installation aid. This makes installation and work on the roof much easier. The mounting aid is snapped into the existing mounting holes on the solar panel and is suitable for all solar panels.
Data sheet
No customer reviews for the moment.
Reference: 75032
Brand: Enphase
Reference: 40442
Brand: Zendure
Reference: 75033
Brand: Enphase
Reference: 40190
Brand: SolarClarity
Reference: 40022
Brand: Anker
Reference: 40189
Brand: Enphase
Reference: 75034
Brand: Enphase
Reference: 40270
Brand: Enphase
Reference: 40106
Brand: Enphase
Reference: 75035
Brand: Enphase
Reference: 40105
Brand: SolarClarity
Reference: 40099
Brand: SolarClarity